Robustness of the synergistic partial-denitrification, anammox, and fermentation process for treating domestic and nitrate wastewaters under fluctuating C/N ratios.

The synergistic partial-denitrification, anammox, and fermentation (SPDAF) process presents a promising solution to treat domestic and nitrate wastewaters. However, its capability to handle fluctuating C/N ratios (the ratios of COD to total inorganic nitrogen) in practical applications remains uncertain. In this study, the SPDAF process was operated for 236 days with C/N ratios of 0.7-3.5, and a high and stable efficiency of nitrogen removal (84.9 ± 7.8%) was achieved. The denitrification and anammox contributions were 6.1 ± 7.1% and 93.9 ± 7.1%, respectively. Batch tests highlighted the pivotal role of in situ fermentation at low biodegradable chemical oxygen demand (BCOD)/NO3- ratios. As the BCOD/NO3- ratios increased from 0 to 6, the NH4+ and NO3- removal rates increased, while the anammox contribution decreased from 100% to 80.1% but remained the primary pathway of nitrogen removal. The cooperation and balanced growth of denitrifying bacteria, anammox bacteria, and fermentation bacteria contributed to the system's robustness under fluctuating C/N ratios.

Occurrence characteristics and influencing factors of antibiotic resistance genes in rural groundwater in Henan Province.

This study determined the antibiotic-resistant gene (ARG) contents of 34 groundwater samples in Henan Province collected from September to October 2022, then assessed the roles of both water quality parameters and intI1 in ARG propagation in groundwater. The results show that there existed universal ARG pollution in groundwater, and sulfonamides-, ß-lactem-, and tetracycline-resistance genes were the most prevalent gene types during the time. Sul1 contributed the majority proportion of the total resistance genes (TARGs). The prevalence of ESBLs gene blaTEM and the occurrence of Carbapenems resistant gene blaOXA-1 suggests the pollution of high-risk ARGs in groundwater demands more attention. IntI1 is prevalent and had a significantly positive correlation with almost 50% ARGs, indicating its contribution to ARG propagation in groundwater. Well types contribute little to ARG propagation in rural groundwater of Henan, which means the protective facilities established by the local government for public wells can effectively prevent contamination from exogenous ARGs. However, the economic level has no impact on the abundance of ARGs in rural groundwater, which suggests the local government should pay greater attention to investment in controlling ARG pollution in Henan rural areas.

Sn Whiskers from Ti2 SnC Max Phase: Bridging Dual-Functionality in Electromagnetic Attenuation.

In the ever-evolving landscape of complex electromagnetic (EM) environments, the demand for EM-attenuating materials with multiple functionalities has grown. 1D metals, known for their high conductivity and ability to form networks that facilitate electron migration, stand out as promising candidates for EM attenuation. Presently, they find primary use in electromagnetic interference (EMI) shielding, but achieving a dual-purpose application for EMI shielding and microwave absorption (MA) remains a challenge. In this context, Sn whiskers derived from the Ti2 SnC MAX phase exhibit exceptional EMI shielding and MA properties. A minimum reflection loss of -44.82 dB is achievable at lower loading ratios, while higher loading ratios yield efficient EMI shielding effectiveness of 42.78 dB. These qualities result from a delicate balance between impedance matching and EM energy attenuation via adjustable conductive networks; and the enhanced interfacial polarization effect at the cylindrical heterogeneous interface between Sn and SnO2 , visually characterized through off-axis electron holography, also contributes to the impressive performance. Considering the compositional diversity of MAX phases and the scalable fabrication approach with environmental friendliness, this study provides a valuable pathway to multifunctional EM attenuating materials based on 1D metals.

Multifunctional MXene/C Aerogels for Enhanced Microwave Absorption and Thermal Insulation.

Two-dimensional transition metal carbides and nitrides (MXene) have emerged as promising candidates for microwave absorption (MA) materials. However, they also have some drawbacks, such as poor impedance matching, high self-stacking tendency, and high density. To tackle these challenges, MXene nanosheets were incorporated into polyacrylonitrile (PAN) nanofibers and subsequently assembled into a three-dimensional (3D) network structure through PAN carbonization, yielding MXene/C aerogels. The 3D network effectively extends the path of microcurrent transmission, leading to enhanced conductive loss of electromagnetic (EM) waves. Moreover, the aerogel's rich pore structure significantly improves the impedance matching while effectively reducing the density of the MXene-based absorbers. EM parameter analysis shows that the MXene/C aerogels exhibit a minimum reflection loss (RLmin) value of - 53.02 dB (f = 4.44 GHz, t = 3.8 mm), and an effective absorption bandwidth (EAB) of 5.3 GHz (t = 2.4 mm, 7.44-12.72 GHz). Radar cross-sectional (RCS) simulations were employed to assess the radar stealth effect of the aerogels, revealing that the maximum RCS reduction value of the perfect electric conductor covered by the MXene/C aerogel reaches 12.02 dB m2. In addition to the MA performance, the MXene/C aerogel also demonstrates good thermal insulation performance, and a 5-mm-thick aerogel can generate a temperature gradient of over 30 °C at 82 °C. This study provides a feasible design approach for creating lightweight, efficient, and multifunctional MXene-based MA materials.

Distribution Pattern and Influencing Factors of Heavy Metal Resistance Genes in the Yellow River Sediments of Henan Section.

The transformation of heavy metal resistance genes (MRGs) in the environment has attracted increasing attention in recent years. However, few studies have reported the MRG content in the Yellow River, one of the main irrigation water sources in the North China Plain. In this study, we quantified MRG abundance by a metagenomic approach, and assessed the influence on MRGs of both bioavailable and total heavy metal (HM) content. The results indicate that Cu-resistant genes are the most common genes, and the prevalence of arsM needs more attention. Comamonadaceae is the dominant family in the Yellow River, and the presence of organic pollutants may contribute to the prevalence of Vicinamibacteraceae, Nocardioidaceae, and Flavobacteriacea. The results of the Mantel test and Spearman analysis indicate that both the bioavailable fractions and total content of HMs could have little influence on MRGs. Network analysis results indicate that some dominant bacteria could be the potential hosts of some prevalent MRGs, which may exert an adverse impact on human health.

N-Doped Honeycomb-like Ag@N-Ti3C2Tx Foam for Electromagnetic Interference Shielding.

To solve the pollution problem of electromagnetic waves, new electromagnetic shielding materials should meet the requirements of being lightweight with high electrical conductivity. In this work, the combination of silver (Ag) nanoparticles and nitrogen doping (N-doping) was expected to tune the electromagnetic and physical properties of Ti3C2Tx MXene, and the Ag@N-Ti3C2Tx composites were fabricated through the hydrothermal reactions. The nitrogen doped (N-doped) Ag@Ti3C2Tx composites showed a hollow structure with a pore size of 5 µm. The influence of N-doped degrees on the electromagnetic interference (EMI) shielding performance was investigated over 8-18 GHz. Therefore, the controlled N-doping composites exhibited reflection-based EMI shielding performance due to the electrical conductivity and the special three-dimensional (3D) honeycomb-like structure. The achieved average EMI shielding values were 52.38 dB at the X-band and 72.72 dB at the Ku-band. Overall, the Ag@N-Ti3C2Tx foam, due to its special 3D honeycomb-like structure, not only meets the characteristics of light weight, but also exhibits ultra-high-efficiency EMI shielding performance, revealing great prospects in the application of electromagnetic wave shielding field.

The Sources and Potential Hosts Identification of Antibiotic Resistance Genes in the Yellow River, Revealed by Metagenomic Analysis.

The fate of antibiotic resistance genes (ARGs) has been revealed in various environmental media in recent years. Namely, the emergence of genes that resist colistin and carbapenems has attracted wide attention. However, the pollution condition of ARGs and sources in the Yellow River is still little understood, despite the river being the second longest in China. The present study determined the levels of ARG pollution in the Henan section of the Yellow River and evaluated the role of the aquaculture industry in the spread of ARGs. As revealed by the results, a total of 9 types of ARGs were detected in the sediments of the Yellow River, and the total ARG content in the Yellow River ranges from 7.27 to 245.45 RPKM. Sul1 and sul2 are the dominant ARGs, and the huge usage of sulfonamides, horizontal gene transfer, and wide bacteria host contribute to the prevalence of these two genes. The results of Spearman correlation analysis indicate that the breeding industry has little influence on ARGs in the Yellow River. Network analysis reveals that the opportunistic pathogen Pseudomonas is the potential host of sul1, tetG, and ANT(3'')-IIa, which can pose a risk to human health.